If you did all right, you now have a working PPTP VPN server. For more details about ARP modes go to mikrotik > /interface bridge printĠ R name='br1' mtu=1500 l2mtu=1598 arp=proxy-arp mac-address=4C:5E:0C:21:A4:85 protocol-mode=rstp If you want to see other devices in your subnet, you must change ARP mode for your Bridge. If this is OK for you, you don’t need to do anything else. If you skip this step, you will be able to connect to your VPN server, you will have the same public IP as your VPN server, but you will not see any other devices connected on this subnet. This step is the main reason that I’m writing this tutorial, so it deserves a few word :) In this step we just need to enable our PPTP server and set default profile… > /interface pptp-server server print This is very useful if you need to create firewall rules for a specific user. In this step you bind user ppp1 to interface pptp-in1. This step is optional, because your VPN server will work even if you skip this. Step 4: Create PPTP Server Binding (Optional) Use-compression=default use-vj-compression=default use-encryption=yes only-one=defaultĬhange-tcp-mss=yes address-list='' dns-server=8.8.8.8,8.8.4.4

> /ppp profile printġ name='VPN-profile' local-address=192.168.1.1 remote-address=VPN-pool bridge=br1 use-mpls=default Settings in /ppp secret User Database override corresponding /ppp profile settings except that single IP addresses always take precedence over IP pools when specified as local-address or remote-address parameters. PPP profiles are used to define default values for user access records stored under /ppp secret submenu. # NAME SERVICE CALLER-ID PASSWORD PROFILE REMOTE-ADDRESS In this example only one user is created, but you can add as many user as you need… > /ppp secret print In this step you will create a user that can connect to your VPN Server. IP pools are used to define range of IP addresses that will be used for your PPTP VPN server > /ip pool print Here is a simple step by step tutorial with images and all information that you need to get a fully working PPTP VPN server… Step 1: create VPN pool

Step by Step: How to configure a PPTP VPN Server on Mikrotik RouterOSīy Uroš, in Network Stuff (31 Comments) Introīefore I started to wrote this post, I thought that would be nice to say some word about PPTP VPN and Mikrotik RouterOS, but then I realized that if you are reading this, there is no need to explain what is PPTP VPN server or Mikrotik RouterOS.

Mikrotik wiki